Zojirushi CV-TYQ40 (4 litre) VE hybrid water heater
- 220-240v, 50hz with 3 pin UK plug
- 4 litre capacity
- Very low energy consumption - 700W to boil and 23W per hour to keep warm (traditional kettles use 3000W per boil)
- 75% energy saving compared to other water heaters using super-VE Hybrid technology
- 4 temperature settings plus non-electric keep warm
- Water level gauge
- Dispense button for easy pouring of hot water
- 'Café-drip' mode
- Timer function for up to 10 hours in advance
- Non-stick inner container
- Descaling mode for easy cleaning
- Detachable power cord
Ever wanted the convenience of boiling water available at the touch of a button? Well it is as simple as this Zojirushi hot water heater - no more waiting to make hot drinks, noodles or soups. You just fill it up with water, switch it on and forget about it - until you're ready for hot water. No Asian kitchen is without one!
The Zojirushi CV-TYQ40 saves energy - it is the latest technology for hot water heaters and has energy savings of 75% over other standard water heaters. See the specifications for more information on energy consumption. This water heater is designed to be filled and left on continuously, so boiling water is available any time for hot drinks, 'instant' foods like ramen, filling flasks or general cooking use. The water heater doesn't need to be emptied, just top it up with cold water when hot water is not needed - it takes between 25-35 minutes to bring the water to 98°C for the initial boil.
This Zojirushi super-VE Hybrid water heater has a similar footprint to your traditional kettle, the LCD screen displays what temperature the water inside is and once the initial boil has finished the unit will play a tune to let you know. The unit creates a vacuum insulated seal to ensure the water is kept at the highest temperature possible whilst conserving energy. This water heater is designed to be left on for 24 hours, seven days a week and has an automatic shut off feature to stop it boiling dry or if the lid isn't shut properly. Unique to the super-VE Hybrid model is the Thermal Insulation Keep Warm mode - by selecting this you save energy as the power to the unit is shut off and the water is kept at the correct temperature by the thermal insulation built into the water heater. There is an easy to use energy saver timer function which can be programmed up to 10 hours in advance to have hot water ready for when you wake up in the morning or get in from work. By using the different keep warm settings you can save up to 25% electricity.
The only maintenance required is to descale the interior of the water heater at intervals depending on the scale build-up. Full instructions for descaling are provided in the manufactures manual and requires simple citric acid cleaner like a traditional kettle or coffee maker.
|Capacity||4 litre capacity|
|Design||Clean white exterior|
|Power||220-240v, 50hz with 3 pin UK plug, 700W|
|Power consumption||Power consumption during keep warm -- 98° setting - 24 watts, 90° setting - 21 watts, 80° setting - 17 watts, 70° setting - 14 watts|
|Boil time for water||Takes between 25-35 minutes to bring the water to 98°C for the initial boil.|
|Dimensions (L x W x D)||28.50cm x 21.00cm x 35.00cm|